Posts by:
-1.png)
The MRF7S21080HSR3 from NXP Semiconductors is an N-channel enhancement-mode lateral MOSFET (LDMOS) RF power transistor designed for CDMA base station applications from 2110 to 2170 MHz. If you're working on cellular infrastructure amplifiers that need 22 W of linear average power with 18 dB of gain at 28 V, this part is a dependable choice.
The UWE-12/6-Q48N-C from Murata Power Solutions is an isolated DC-DC converter designed for high-density system boards running from a 48 V nominal supply. If you’re working on telecom, embedded or instrumentation equipment that needs a regulated 12 V output at up to 6 A from a wide, variable input, this part is a dependable choice.
.png)
The APTS012A0X3-SRZ from ABB Power Electronics is a 12A non-isolated DC-DC power module designed for point-of-load conversion on intermediate bus architectures. If you’re working on telecom, networking or server hardware that needs a tightly regulated low-voltage rail from a 5V or 12V bus, this part is a dependable choice.
.png)
The AMIS41682CANM1RG from onsemi (formerly ON Semiconductor) is a fault-tolerant CAN transceiver designed for low-speed in-vehicle networks. If you’re working on automotive body or comfort electronics that need a CAN link able to keep running through a bus wiring fault, this part is a dependable choice.
.png)
The 10CX220YF672I5G from Intel is a 220,000 logic element Cyclone® 10 GX FPGA designed for high-bandwidth industrial, video and communications systems. If you’re working...
