The M27C4001-10F1 from STMicroelectronics is a 4 Mbit (512 Kb x 8) UV-erasable EPROM housed in a windowed 32-pin ceramic package, with a fast 100 ns access time. It is a dependable choice for engineers maintaining or repairing legacy industrial, telecom, and embedded systems that still rely on parallel EPROM for boot code and firmware storage.
The device stores 4 megabits of data organised as 512K words by 8 bits, and its quartz window allows the memory to be erased with ultraviolet light and reprogrammed, which makes it useful for development work and field servicing alike. It operates from a single 5 V supply and uses a standard parallel interface, so it drops into existing designs without additional glue logic. The FDIP32W ceramic frit-seal package and 0 to 70°C commercial temperature rating are covered in more detail below.
Generous 4 Mbit storage capacity
The M27C4001-10F1 holds 4 megabits organised as 512K x 8, giving ample room for boot code, lookup tables, and firmware images in a single device.
Fast 100 ns access time
The "-10" speed grade provides a 100 ns access time, fast enough to keep pace with the microprocessors and controllers used in the systems this part typically serves.
UV-erasable and reprogrammable
The windowed ceramic package lets the EPROM be erased under ultraviolet light and rewritten, which is valuable for prototyping, firmware revisions, and refurbishing older equipment.
Standard 5 V parallel interface
The device runs from a single 5 V supply and communicates over a conventional parallel address and data bus, allowing it to slot directly into legacy board designs.
Windowed 32-pin ceramic package
Supplied in the FDIP32W 32-pin ceramic frit-seal DIP with a quartz window, the part suits through-hole assembly and repeated erase-and-program cycles.
RoHS compliance
The M27C4001-10F1 is RoHS compliant, supporting green and compliant manufacturing for both new builds and legacy maintenance.
This part is typically used in: